IRC FAQ: Chanserv Help - English

/msg chanserv access

Syntax: /msg ChanServ ACCESS channel ADD nick level Syntax: ACCESS channel ADD nick level ACCESS channel DEL {nick | entry-num | list} ACCESS channel LIST [mask | list] ACCESS channel CLEAR Maintains the access list for a channel. The access list specifies which users are allowed chanop status or access to ChanServ commands on the channel. Different user levels allow for access to different subsets of privileges; /msg ChanServ HELP ACCESS LEVELS for more specific information. Any nick not on the access list has a user level of 0. The ACCESS ADD command adds the given nickname to the access list with the given user level; if the nick is already present on the list, its access level is changed to the level specified in the command. The level specified must be less than that of the user giving the command, and if the nick is already on the access list, the current access level of that nick must be less than the access level of the user giving the command. The ACCESS DEL command removes the given nick from the access list. If a list of entry numbers is given, those entries are deleted. (See the example for LIST below.) The ACCESS LIST command displays the access list. If a wildcard mask is given, only those entries matching the mask are displayed. If a list of entry numbers is given, only those entries are shown; for example: ACCESS #channel LIST 2-5,7-9 Lists access entries numbered 2 through 5 and 7 through 9. The ACCESS CLEAR command clears all entries of the access list.

/msg chanserv access levels

User access levels By default, the following access levels are defined: Founder Full access to ChanServ functions; automatic opping upon entering channel. Note that only one person may have founder status (it cannot be given using the ACCESS command). 10 Access to AKICK command; automatic opping. 5 Automatic opping. 3 Automatic voicing. 0 No special privileges; can be opped by other ops (unless secure-ops is set). <0 May not be opped. These levels may be changed, or new ones added, using the LEVELS command; type /msg ChanServ HELP LEVELS for information.

/msg chanserv akick

Syntax: /msg ChanServ AKICK channel ADD {nick | mask} [reason] Syntax: AKICK channel ADD {nick | mask} [reason] AKICK channel STICK mask AKICK channel UNSTICK mask AKICK channel DEL {nick | mask | entry-num | list} AKICK channel LIST [mask | entry-num | list] AKICK channel VIEW [mask | entry-num | list] AKICK channel ENFORCE AKICK channel CLEAR Maintains the AutoKick list for a channel. If a user on the AutoKick list attempts to join the channel, ChanServ will ban that user from the channel, then kick the user. The AKICK ADD command adds the given nick or usermask to the AutoKick list. If a reason is given with the command, that reason will be used when the user is kicked; if not, the default reason is "You have been banned from the channel". When akicking a registered nick the nickserv account will be added to the akick list instead of the mask. All users within that nickgroup will then be akicked. The AKICK STICK command permanently bans the given mask on the channel. If someone tries to remove the ban, ChanServ will automatically set it again. You can't use it for registered nicks. The AKICK UNSTICK command cancels the effect of the AKICK STICK command, so you'll be able to unset the ban again on the channel. The AKICK DEL command removes the given nick or mask from the AutoKick list. It does not, however, remove any bans placed by an AutoKick; those must be removed manually. The AKICK LIST command displays the AutoKick list, or optionally only those AutoKick entries which match the given mask. The AKICK VIEW command is a more verbose version of AKICK LIST command. The AKICK ENFORCE command causes ChanServ to enforce the current AKICK list by removing those users who match an AKICK mask. The AKICK CLEAR command clears all entries of the akick list.

/msg chanserv aop

Syntax: /msg ChanServ AOP channel ADD nick Syntax: AOP channel ADD nick AOP channel DEL {nick | entry-num | list} AOP channel LIST [mask | list] AOP channel CLEAR Maintains the AOP (AutoOP) list for a channel. The AOP list gives users the right to be auto-opped on your channel, to unban or invite themselves if needed, to have their greet message showed on join, and so on. The AOP ADD command adds the given nickname to the AOP list. The AOP DEL command removes the given nick from the AOP list. If a list of entry numbers is given, those entries are deleted. (See the example for LIST below.) The AOP LIST command displays the AOP list. If a wildcard mask is given, only those entries matching the mask are displayed. If a list of entry numbers is given, only those entries are shown; for example: AOP #channel LIST 2-5,7-9 Lists AOP entries numbered 2 through 5 and 7 through 9. The AOP CLEAR command clears all entries of the AOP list. The AOP ADD and AOP DEL commands are limited to SOPs or above, while the AOP CLEAR command can only be used by the channel founder. However, any user on the AOP list may use the AOP LIST command. This command may have been disabled for your channel, and in that case you need to use the access list. See /msg ChanServ HELP ACCESS for information about the access list, and /msg ChanServ HELP SET XOP to know how to toggle between the access list and xOP list systems.

/msg chanserv ban

Syntax: /msg ChanServ BAN [#channel [nick [reason]]] Syntax: BAN [#channel [nick [reason]]] Bans a selected nick on a channel. If nick is not given, it will ban you. If channel and nick are not given, it will ban you on all channels you're on, provided you have the rights to. By default, limited to AOPs or those with level 5 access and above on the channel.

/msg chanserv clear

Syntax: /msg ChanServ CLEAR channel what Syntax: CLEAR channel what Tells ChanServ to clear certain settings on a channel. what can be any of the following: MODES Resets all modes on the channel (i.e. clears modes i,k,l,m,n,p,s,t). BANS Clears all bans on the channel. EXCEPTS Clears all excepts on the channel. INVITES Clears all invites on the channel. OPS Removes channel-operator status (mode +o) from all channel operators. HOPS Removes channel-halfoperator status (mode +h) from all channel halfoperators, if supported. VOICES Removes "voice" status (mode +v) from anyone with that mode set. USERS Removes (kicks) all users from the channel. By default, limited to those with founder access on the channel.

/msg chanserv dehalfop

Syntax: /msg ChanServ DEHALFOP [#channel [nick]] Syntax: DEHALFOP [#channel [nick]] Dehalfops a selected nick on a channel. If nick is not given, it will dehalfop you. If channel and nick are not given, it will dehalfop you on all channels you're on, provided you have the rights to. By default, limited to AOPs and those with level 5 access and above on the channel, or to HOPs or those with level 4 and above for self dehalfopping.

/msg chanserv deop

Syntax: /msg ChanServ DEOP [#channel [nick]] Syntax: DEOP [#channel [nick]] Deops a selected nick on a channel. If nick is not given, it will deop you. If channel and nick are not given, it will deop you on all channels you're on, provided you have the rights to. By default, limited to AOPs or those with level 5 access and above on the channel.

/msg chanserv deowner

Syntax: /msg ChanServ DEOWNER [#channel] Syntax: DEOWNER [#channel] Removes your owner status on channel. If channel is not given, it will remove your owner status on all channels you're on, provided you have the rights to. Limited to those with founder access on the channel.

/msg chanserv deprotect

Syntax: /msg ChanServ DEPROTECT [#channel [nick]] Syntax: DEPROTECT [#channel [nick]] Deprotects a selected nick on a channel. If nick is not given, it will deprotect you. If channel and nick are not given, it will deprotect you on all channels you're on, provided you have the rights to. By default, limited to the founder, or to SOPs or those with level 10 and above on the channel for self deprotecting.

/msg chanserv devoice

Syntax: /msg ChanServ DEVOICE [#channel [nick]] Syntax: DEVOICE [#channel [nick]] Devoices a selected nick on a channel. If nick is not given, it will devoice you. If channel and nick are not given, it will devoice you on all channels you're on, provided you have the rights to. By default, limited to AOPs or those with level 5 access and above on the channel, or to VOPs or those with level 3 and above for self devoicing.

/msg chanserv drop

Syntax: /msg ChanServ DROP channel Syntax: DROP channel Unregisters the named channel. Can only be used by channel founder, who must use the IDENTIFY command first.

/msg chanserv expires

Note that any channel which is not used for %d days (i.e. which no user on the channel's access list enters for that period of time) will be automatically dropped.

/msg chanserv getkey

Syntax: /msg ChanServ GETKEY channel Syntax: GETKEY channel Returns the key of the given channel. This is a command mainly intended to be used by bots and/or scripts, so the output is in the following way: KEY key is "NO KEY" if no key is set.

/msg chanserv halfop

Syntax: /msg ChanServ HALFOP [#channel [nick]] Syntax: HALFOP [#channel [nick]] Halfops a selected nick on a channel. If nick is not given, it will halfop you. If channel and nick are not given, it will halfop you on all channels you're on, provided you have the rights to. By default, limited to AOPs and those with level 5 access and above on the channel, or to HOPs or those with level 4 and above for self halfopping.

/msg chanserv help

ChanServ allows you to register and control various aspects of channels. ChanServ can often prevent malicious users from "taking over" channels by limiting who is allowed channel operator privileges. Available commands are listed below; to use them, type /msg ChanServ command. For more information on a specific command, type /msg ChanServ HELP command.

/msg chanserv hop

Syntax: /msg ChanServ HOP channel ADD nick Syntax: HOP channel ADD nick HOP channel DEL {nick | entry-num | list} HOP channel LIST [mask | list] HOP channel CLEAR Maintains the HOP (HalfOP) list for a channel. The HOP list gives users the right to be auto-halfopped on your channel. The HOP ADD command adds the given nickname to the HOP list. The HOP DEL command removes the given nick from the HOP list. If a list of entry numbers is given, those entries are deleted. (See the example for LIST below.) The HOP LIST command displays the HOP list. If a wildcard mask is given, only those entries matching the mask are displayed. If a list of entry numbers is given, only those entries are shown; for example: HOP #channel LIST 2-5,7-9 Lists HOP entries numbered 2 through 5 and 7 through 9. The HOP CLEAR command clears all entries of the HOP list. The HOP ADD, HOP DEL and HOP LIST commands are limited to AOPs or above, while the HOP CLEAR command can only be used by the channel founder. This command may have been disabled for your channel, and in that case you need to use the access list. See /msg ChanServ HELP ACCESS for information about the access list, and /msg ChanServ HELP SET XOP to know how to toggle between the access list and xOP list systems.

/msg chanserv identify

Syntax: /msg ChanServ IDENTIFY channel password Syntax: IDENTIFY channel password Authenticates you to ChanServ as the founder of the given channel. Many commands require you to use this command before using them. The password should be the same one you sent with the REGISTER command.

/msg chanserv info

Syntax: /msg ChanServ INFO channel [ALL] Syntax: INFO channel [ALL] Lists information about the named registered channel, including its founder, time of registration, last time used, description, and mode lock, if any. If ALL is specified, the entry message and successor will also be displayed. By default, the ALL option is limited to those with founder access on the channel.

/msg chanserv invite

Syntax: /msg ChanServ INVITE channel Syntax: INVITE channel Tells ChanServ to invite you into the given channel. By default, limited to AOPs or those with level 5 and above on the channel.

/msg chanserv kick

Syntax: /msg ChanServ KICK [#channel [nick [reason]]] Syntax: KICK [#channel [nick [reason]]] Kicks a selected nick on a channel. If nick is not given, it will kick you. If channel and nick are not given, it will kick you on all channels you're on, provided you have the rights to. By default, limited to AOPs or those with level 5 access and above on the channel.

/msg chanserv levels

Syntax: /msg ChanServ LEVELS channel SET type level Syntax: LEVELS channel SET type level LEVELS channel {DIS | DISABLE} type LEVELS channel LIST LEVELS channel RESET The LEVELS command allows fine control over the meaning of the numeric access levels used for channels. With this command, you can define the access level required for most of ChanServ's functions. (The SET FOUNDER and SET PASSWORD commands, as well as this command, are always restricted to the channel founder.) LEVELS SET allows the access level for a function or group of functions to be changed. LEVELS DISABLE (or DIS for short) disables an automatic feature or disallows access to a function by anyone other than the channel founder. LEVELS LIST shows the current levels for each function or group of functions. LEVELS RESET resets the levels to the default levels of a newly-created channel (see HELP ACCESS LEVELS). For a list of the features and functions whose levels can be set, see HELP LEVELS DESC.

/msg chanserv list

Syntax: /msg ChanServ LIST pattern Syntax: LIST pattern Lists all registered channels matching the given pattern. (Channels with the PRIVATE option set are not listed.) Note that a preceding '#' specifies a range, channel names are to be written without '#'.

/msg chanserv logout

Syntax: /msg ChanServ LOGOUT channel nickname Syntax: LOGOUT channel nickname This command will log the selected nickname out meaning they would have to reidentify themselves to regain their access. If you are the founder of the channel, you can log out anybody, else you can only log out yourself.

/msg chanserv op

Syntax: /msg ChanServ OP [#channel [nick]] Syntax: OP [#channel [nick]] Ops a selected nick on a channel. If nick is not given, it will op you. If channel and nick are not given, it will op you on all channels you're on, provided you have the rights to. By default, limited to AOPs or those with level 5 access and above on the channel.

/msg chanserv owner

Syntax: /msg ChanServ OWNER [#channel] Syntax: OWNER [#channel] Gives you owner status on channel. If channel is not given, it will give you owner status on all channels you're on, provided you have the rights to. Limited to those with founder access on the channel.

/msg chanserv protect

Syntax: /msg ChanServ PROTECT [#channel [nick]] Syntax: PROTECT [#channel [nick]] Protects a selected nick on a channel. If nick is not given, it will protect you. If channel and nick are not given, it will protect you on all channels you're on, provided you have the rights to. By default, limited to the founder, or to SOPs or those with level 10 and above on the channel for self protecting.

/msg chanserv register

Syntax: /msg ChanServ REGISTER channel password description Syntax: REGISTER channel password description Registers a channel in the ChanServ database. In order to use this command, you must first be a channel operator on the channel you're trying to register. The password is used with the IDENTIFY command to allow others to make changes to the channel settings at a later time. The last parameter, which must be included, is a general description of the channel's purpose. When you register a channel, you are recorded as the "founder" of the channel. The channel founder is allowed to change all of the channel settings for the channel; ChanServ will also automatically give the founder channel-operator privileges when s/he enters the channel. See the ACCESS command (/msg ChanServ HELP ACCESS) for information on giving a subset of these privileges to other channel users. NOTICE: In order to register a channel, you must have first registered your nickname. If you haven't, /msg ChanServ HELP for information on how to do so.

/msg chanserv sendpass

Syntax: /msg ChanServ SENDPASS channel Syntax: SENDPASS channel Send the password of the given channel to the e-mail address set in the founder's nickname record. This command is really useful to deal with lost passwords. May be limited to IRC operators on certain networks. This command is unavailable when encryption is enabled.

/msg chanserv servadmin drop

Syntax: /msg ChanServ DROP channel Syntax: DROP channel Unregisters the named channel. Only Services admins can drop a channel for which they have not identified.

/msg chanserv servadmin forbid

Syntax: /msg ChanServ FORBID channel [reason] Syntax: FORBID channel [reason] Disallows anyone from registering or using the given channel. May be cancelled by dropping the channel. Reason may be required on certain networks.

/msg chanserv servadmin getpass

Syntax: /msg ChanServ GETPASS channel Syntax: GETPASS channel Returns the password for the given channel. Note that whenever this command is used, a message including the person who issued the command and the channel it was used on will be logged and sent out as a WALLOPS/GLOBOPS.

/msg chanserv servadmin help

Services admins can also drop any channel without needing to identify via password, and may view the access, AKICK, and level setting lists for any channel.

/msg chanserv servadmin info

Services admins can use the ALL parameter with any channel.

/msg chanserv servadmin list

Syntax: /msg ChanServ LIST pattern [FORBIDDEN] [SUSPENDED] [NOEXPIRE] Syntax: LIST pattern [FORBIDDEN] [SUSPENDED] [NOEXPIRE] Lists all registered channels matching the given pattern. Channels with the PRIVATE option set will only be displayed to Services admins. Channels with the NOEXPIRE option set will have a ! appended to the channel name for Services admins. If the FORBIDDEN, SUSPENDED or NOEXPIRE options are given, only channels which, respectively, are FORBIDden, SUSPENDed or have the NOEXPIRE flag set will be displayed. If multiple options are given, more types of channels will be displayed. These options are limited to Services admins.

/msg chanserv servadmin logout

Syntax: /msg ChanServ LOGOUT channel [nickname] Syntax: LOGOUT channel [nickname] This command will log the selected nickname out meaning they would have to reidentify themselves to regain their access. If you are the founder of the channel, you can log out anybody, else you can only log out yourself. If you are a Services admin, you can log out anybody of any channel without having to be the founder of the channel. Also, you can omit the nickname parameter; this will log out all identified users from the channel.

/msg chanserv servadmin set

Services admins can also set the option NOEXPIRE, with which channels can be prevented from expiring. Additionally, Services admins can set options for any channel without identifying by password for the channel.

/msg chanserv servadmin set noexpire

Syntax: /msg ChanServ SET channel NOEXPIRE {ON | OFF} Syntax: SET channel NOEXPIRE {ON | OFF} Sets whether the given channel will expire. Setting this to ON prevents the channel from expiring.

/msg chanserv servadmin status

Syntax: /msg ChanServ STATUS channel nickname Syntax: STATUS channel nickname Returns the current access level of the given nick on the given channel. The reply is of the form: STATUS channel nickname access-level If an error occurs, the reply will be in the form: STATUS ERROR error-message

/msg chanserv servadmin suspend

Syntax: /msg ChanServ SUSPEND channel [reason] Syntax: SUSPEND channel [reason] Disallows anyone from registering or using the given channel. May be cancelled by using the UNSUSPEND command to preserve all previous channel data/settings. Reason may be required on certain networks.

/msg chanserv servadmin unsuspend

Syntax: /msg ChanServ UNSUSPEND channel Syntax: UNSUSPEND channel Releases a suspended channel. All data and settings are preserved from before the suspension.

/msg chanserv set

Syntax: /msg ChanServ SET channel option parameters Syntax: SET channel option parameters Allows the channel founder to set various channel options and other information. Available options: FOUNDER Set the founder of a channel SUCCESSOR Set the successor for a channel PASSWORD Set the founder password DESC Set the channel description URL Associate a URL with the channel EMAIL Associate an E-mail address with the channel ENTRYMSG Set a message to be sent to users when they enter the channel BANTYPE Set how Services make bans on the channel MLOCK Lock channel modes on or off KEEPTOPIC Retain topic when channel is not in use OPNOTICE Send a notice when OP/DEOP commands are used PEACE Regulate the use of critical commands PRIVATE Hide channel from LIST command RESTRICTED Restrict access to the channel SECURE Activate ChanServ security features SECUREOPS Stricter control of chanop status SECUREFOUNDER Stricter control of channel founder status SIGNKICK Sign kicks that are done with KICK command TOPICLOCK Topic can only be changed with TOPIC XOP Toggle the user privilege system Type /msg ChanServ HELP SET option for more information on a particular option.

/msg chanserv set bantype

Syntax: /msg ChanServ SET channel BANTYPE bantype Syntax: SET channel BANTYPE bantype Sets the ban type that will be used by services whenever they need to ban someone from your channel. bantype is a number between 0 and 3 that means: 0: ban in the form *!user@host 1: ban in the form *!*user@host 2: ban in the form *!*@host 3: ban in the form *!*user@*.domain

/msg chanserv set desc

Syntax: /msg ChanServ SET channel DESC description Syntax: SET channel DESC description Sets the description for the channel, which shows up with the LIST and INFO commands.

/msg chanserv set email

Syntax: /msg ChanServ SET channel EMAIL [address] Syntax: SET channel EMAIL [address] Associates the given E-mail address with the channel. This address will be displayed whenever someone requests information on the channel with the INFO command. If no parameter is given, deletes any current E-mail address for the channel.

/msg chanserv set entrymsg

Syntax: /msg ChanServ SET channel ENTRYMSG [message] Syntax: SET channel ENTRYMSG [message] Sets the message which will be sent via /notice to users when they enter the channel. If no parameter is given, causes no message to be sent upon entering the channel.

/msg chanserv set founder

Syntax: /msg ChanServ SET channel FOUNDER nick Syntax: SET channel FOUNDER nick Changes the founder of a channel. The new nickname must be a registered one.

/msg chanserv set keeptopic

Syntax: /msg ChanServ SET channel KEEPTOPIC {ON | OFF} Syntax: SET channel KEEPTOPIC {ON | OFF} Enables or disables the topic retention option for a channel. When topic retention is set, the topic for the channel will be remembered by ChanServ even after the last user leaves the channel, and will be restored the next time the channel is created.

/msg chanserv set mlock

Syntax: /msg ChanServ SET channel MLOCK modes Syntax: SET channel MLOCK modes Sets the mode-lock parameter for the channel. ChanServ allows you to define certain channel modes to be always on, off or free to be either on or off. The modes parameter is constructed exactly the same way as a /MODE command; that is, modes followed by a + are locked on, and modes followed by a - are locked off. Note, however, that unlike the /MODE command, each use of SET MLOCK will remove all modes previously locked before setting the new! Warning: If you set a mode-locked key, as in the second example below, you should also set the RESTRICTED option for the channel (see HELP SET RESTRICTED), or anyone entering the channel when it is empty will be able to see the key! Examples: SET #channel MLOCK +nt-iklps Forces modes n and t on, and modes i, k, l, p, and s off. Mode m is left free to be either on or off. SET #channel MLOCK +knst-ilmp my-key Forces modes k, n, s, and t on, and modes i, l, m, and p off. Also forces the channel key to be "my-key". SET #channel MLOCK + Removes the mode lock; all channel modes are free to be either on or off.

/msg chanserv set opnotice

Syntax: /msg ChanServ SET channel OPNOTICE {ON | OFF} Syntax: SET channel OPNOTICE {ON | OFF} Enables or disables the op-notice option for a channel. When op-notice is set, ChanServ will send a notice to the channel whenever the OP or DEOP commands are used for a user in the channel.

/msg chanserv set password

Syntax: /msg ChanServ SET channel PASSWORD password Syntax: SET channel PASSWORD password Sets the password used to identify as the founder of the channel.

/msg chanserv set peace

Syntax: /msg ChanServ SET channel PEACE {ON | OFF} Syntax: SET channel PEACE {ON | OFF} Enables or disables the peace option for a channel. When peace is set, a user won't be able to kick, ban or remove a channel status of a user that has a level superior or equal to his via ChanServ commands.

/msg chanserv set private

Syntax: /msg ChanServ SET channel PRIVATE {ON | OFF} Syntax: SET channel PRIVATE {ON | OFF} Enables or disables the private option for a channel. When private is set, a /msg ChanServ LIST will not include the channel in any lists.

/msg chanserv set restricted

Syntax: /msg ChanServ SET channel RESTRICTED {ON | OFF} Syntax: SET channel RESTRICTED {ON | OFF} Enables or disables the restricted access option for a channel. When restricted access is set, users not on the access list will instead be kicked and banned from the channel.

/msg chanserv set secure

Syntax: /msg ChanServ SET channel SECURE {ON | OFF} Syntax: SET channel SECURE {ON | OFF} Enables or disables ChanServ's security features for a channel. When SECURE is set, only users who have registered their nicknames with ChanServ and IDENTIFY'd with their password will be given access to the channel as controlled by the access list.

/msg chanserv set securefounder

Syntax: /msg ChanServ SET channel SECUREFOUNDER {ON | OFF} Syntax: SET channel SECUREFOUNDER {ON | OFF} Enables or disables the secure founder option for a channel. When secure founder is set, only the real founder will be able to drop the channel, change its password, its founder and its successor, and not those who are IDENTIFY'd with ChanServ.

/msg chanserv set secureops

Syntax: /msg ChanServ SET channel SECUREOPS {ON | OFF} Syntax: SET channel SECUREOPS {ON | OFF} Enables or disables the secure ops option for a channel. When secure ops is set, users who are not on the userlist will not be allowed chanop status.

/msg chanserv set signkick

Syntax: /msg ChanServ SET channel SIGNKICK {ON | LEVEL | OFF} Syntax: SET channel SIGNKICK {ON | LEVEL | OFF} Enables or disables signed kicks for a channel. When SIGNKICK is set, kicks issued with ChanServ KICK command will have the nick that used the command in their reason. If you use LEVEL, those who have a level that is superior or equal to the SIGNKICK level on the channel won't have their kicks signed. See /msg ChanServ HELP LEVELS for more information.

/msg chanserv set successor

Syntax: /msg ChanServ SET channel SUCCESSOR nick Syntax: SET channel SUCCESSOR nick Changes the successor of a channel. If the founder's nickname expires or is dropped while the channel is still registered, the successor will become the new founder of the channel. However, if the successor already has too many channels registered (%d), the channel will be dropped instead, just as if no successor had been set. The new nickname must be a registered one.

/msg chanserv set topiclock

Syntax: /msg ChanServ SET channel TOPICLOCK {ON | OFF} Syntax: SET channel TOPICLOCK {ON | OFF} Enables or disables the topic lock option for a channel. When topic lock is set, ChanServ will not allow the channel topic to be changed except via the TOPIC command.

/msg chanserv set url

Syntax: /msg ChanServ SET channel URL [url] Syntax: SET channel URL [url] Associates the given URL with the channel. This URL will be displayed whenever someone requests information on the channel with the INFO command. If no parameter is given, deletes any current URL for the channel.

/msg chanserv set xop

Syntax: /msg ChanServ SET channel XOP {ON | OFF} Syntax: SET channel XOP {ON | OFF} Enables or disables the xOP lists system for a channel. When XOP is set, you have to use the AOP/SOP/VOP commands in order to give channel privileges to users, else you have to use the ACCESS command. Technical Note: when you switch from access list to xOP lists system, your level definitions and user levels will be changed, so you won't find the same values if you switch back to access system! You should also check that your users are in the good xOP list after the switch from access to xOP lists, because the guess is not always perfect... in fact, it is not recommended to use the xOP lists if you changed level definitions with the LEVELS command. Switching from xOP lists system to access list system causes no problem though.

/msg chanserv sop

Syntax: /msg ChanServ SOP channel ADD nick Syntax: SOP channel ADD nick SOP channel DEL {nick | entry-num | list} SOP channel LIST [mask | list] SOP channel CLEAR Maintains the SOP (SuperOP) list for a channel. The SOP list gives users all rights given by the AOP list, and adds those needed to use the AutoKick and the BadWords lists, to send and read channel memos, and so on. The SOP ADD command adds the given nickname to the SOP list. The SOP DEL command removes the given nick from the SOP list. If a list of entry numbers is given, those entries are deleted. (See the example for LIST below.) The SOP LIST command displays the SOP list. If a wildcard mask is given, only those entries matching the mask are displayed. If a list of entry numbers is given, only those entries are shown; for example: SOP #channel LIST 2-5,7-9 Lists AOP entries numbered 2 through 5 and 7 through 9. The SOP CLEAR command clears all entries of the SOP list. The SOP ADD, SOP DEL and SOP CLEAR commands are limited to the channel founder. However, any user on the AOP list may use the SOP LIST command. This command may have been disabled for your channel, and in that case you need to use the access list. See /msg ChanServ HELP ACCESS for information about the access list, and /msg ChanServ HELP SET XOP to know how to toggle between the access list and xOP list systems.

/msg chanserv topic

Syntax: /msg ChanServ TOPIC channel [topic] Syntax: TOPIC channel [topic] Causes ChanServ to set the channel topic to the one specified. If topic is not given, then an empty topic is set. This command is most useful in conjunction with SET TOPICLOCK. See /msg ChanServ HELP SET TOPICLOCK for more information. By default, limited to those with founder access on the channel.

/msg chanserv unban

Syntax: /msg ChanServ UNBAN channel Syntax: UNBAN channel Tells ChanServ to remove all bans preventing you from entering the given channel. By default, limited to AOPs or those with level 5 and above on the channel.

/msg chanserv voice

Syntax: /msg ChanServ VOICE [#channel [nick]] Syntax: VOICE [#channel [nick]] Voices a selected nick on a channel. If nick is not given, it will voice you. If channel and nick are not given, it will voice you on all channels you're on, provided you have the rights to. By default, limited to AOPs or those with level 5 access and above on the channel, or to VOPs or those with level 3 and above for self voicing.

/msg chanserv vop

Syntax: /msg ChanServ VOP channel ADD nick Syntax: VOP channel ADD nick VOP channel DEL {nick | entry-num | list} VOP channel LIST [mask | list] VOP channel CLEAR Maintains the VOP (VOicePeople) list for a channel. The VOP list allows users to be auto-voiced and to voice themselves if they aren't. The VOP ADD command adds the given nickname to the VOP list. The VOP DEL command removes the given nick from the VOP list. If a list of entry numbers is given, those entries are deleted. (See the example for LIST below.) The VOP LIST command displays the VOP list. If a wildcard mask is given, only those entries matching the mask are displayed. If a list of entry numbers is given, only those entries are shown; for example: VOP #channel LIST 2-5,7-9 Lists VOP entries numbered 2 through 5 and 7 through 9. The VOP CLEAR command clears all entries of the VOP list. The VOP ADD, VOP DEL and VOP LIST commands are limited to AOPs or above, while the VOP CLEAR command can only be used by the channel founder. This command may have been disabled for your channel, and in that case you need to use the access list. See /msg ChanServ HELP ACCESS for information about the access list, and /msg ChanServ HELP SET XOP to know how to toggle between the access list and xOP list systems.
Source: Anope Services